sales@procamlock.com
Hanki välitön tarjous
  • Messinki

    Materiaali

  • 1/8''-4''

    Koko

  • BSP/NPT/GHT

    Lanka

Messinkiset putkien liitososat

Brass Union

Brass union is a detachable joint commonly used in pipe system connections. It has excellent corrosion resistance, durability and sealing, and is widely used in various fluid systems such as natural gas and water pipes.

  • Stable Pressure Resistance
  • Easy to Install and Maintain
  • Good Temperature Resistance
Hanki välitön tarjous
  • OEM Custom
  • Nopea ja turvallinen logistiikka

Brass Union

Brass union is a detachable pipe connection joint that mainly uses threaded connection. It achieves connection and sealing by rotating and tightening the internal and external threads. It is easy to operate and does not require cutting or complicated operations, which greatly saves time and labor costs. At the same time, it also provides convenience for the maintenance and replacement of pipelines.

Brass union has the advantages of easy assembly and disassembly, excellent corrosion resistance, good sealing performance, etc., and plays an important role in the pipe system. It is made of high-quality brass, has excellent mechanical strength, and has been proven to be used in drinking water systems. Due to the above advantages, brass union is widely used in HVAC, natural gas pipelines, chemical, and petroleum pipeline systems.

Ominaisuudet

Easy to Disassemble and Assemble

The brass union is composed of detachable parts, which can be quickly disassembled and installed, easy to maintain and replace parts, and is very suitable for systems that require frequent disassembly.

Erinomainen tiivistyskyky

The connection method of the union is threaded connection, and the seal can be reinforced with raw tape or sealing ring to effectively prevent pipe leakage and ensure system safety.

Wide Range of Applications

Due to its characteristics and advantages, brass union is widely used in industrial pipes, natural gas pipes, HVAC pipes, drainage pipes and other systems.

Good Corrosion Resistance

The brass itself has excellent corrosion resistance, which can effectively resist corrosion from water, oil and other substances, and extend the service life of the components.

Sovellukset

Polttoaine & öljy

Nokkakytkimet ovat välttämättömiä polttoaine- ja öljyteollisuudessa, sillä ne tarjoavat luotettavat ja tiiviit liitokset öljytuotteiden siirtämiseen. Niiden pikaliitäntä- ja -katkaisukyky parantaa turvallisuutta ja tehokkuutta lastaus- ja purkuprosessien aikana.

Maatalous

Ruoka ja juomat

Kaasu

Tekniset tiedot

1/8“-4”

Tuotteen tekniset tiedot

TuotekoodiLT-46A
TeknologiaForging/CNC Processing
Fyysinen ominaisuusTensile Strength: 350-450 MPa
Materiaali, jota voimme tehdäMessinki
LankaBS21 (BSPT&BSPP), ANSI/ASME B1.20.1 (NPT), DIN2999(R/RP), JIS B O203/2(PT), KS BO221/2(PT) jne.
Temperature (Static State)-10℃（14°F） to 180℃（356°F）
PintaPolishing/Nickel Plating/Coating
MalliP-084
MuotoEqual

Logistiikka ja sertifioinnit

TodistusISO 9001:2015, IS014001:2015, CE, ROHS, KC jne...
PakettiPVC pussi jokaiselle kappaleelle.Laatikot kuormalavalla/out kuormalavalla/puulaatikot
SatamaNingbo/Shanghai, Kiina tai muu satama pyynnöstä.
NäyteTarjoa ilmaisia näytteitä ja kerättyjä rahtimääriä
Toimituksen tiedotKunkin tilauksen määrien ja eritelmien mukaan Täydellinen varasto, joka tarjoaa nopeat toimitukset pienille tilauksille.Normaali toimitusaika on 30-45 päivää talletuksen vastaanottamisen jälkeen.
Yleiset sovelluksetOil and Gas, Chemical, Food and Beverage, Agricultural Irrigation
Hanki välitön tarjous

Tuki

Lisää tukea

Asennusopas

The brass union uses a threaded connection. Rotate the threaded end of the interface in the correct thread direction and tighten it manually or with a pipe wrench. You can also apply raw tape to the threads to strengthen the seal and prevent leakage. Be careful not to use excessive force to damage the threads. Finally, remember to check the sealing effect.

Myynnin jälkeinen huolto

UKK

Looking for answers about Brass Union? Visit our FAQ section for detailed information and expert insights.

Ota yhteyttä
  • Can the threads of the brass union be customized?
    Of course, we can provide you with customized thread solutions such as BSP/NPT.
  • Is sealing tape necessary during installation?
    It is best to use sealing tape during installation to strengthen the connection, achieve a better seal and prevent leakage.
  • What sizes can you provide?
    We can provide you with sizes from 1/8", 1/2", 3/4" to 4". If you have any special requirements, you can also contact us at any time.
  • What pipes are suitable for brass union?
    Our union is suitable for pipes such as PVC pipes, stainless steel pipes, and copper pipes.
  • Can it be disassembled and assembled repeatedly?
    Yes, our brass union is designed to be disassembled and assembled repeatedly, which is very suitable for systems that require frequent disassembly and maintenance.

Hanki Camlock-kytkin tänään!

PROCAMLOCK tarjoaa kestäviä ja suorituskykyisiä nokkapyöräliitoksia helppokäyttöiseen käyttöön eri teollisuudenaloilla, kuten elintarviketeollisuudessa, kemianteollisuudessa ja rakennusalalla.

Hanki välitön tarjous
Valitse kieli [gtranslate]
fiSuomi
en_USEnglish arالعربية de_DEDeutsch es_ESEspañol fr_FRFrançais ru_RUРусский da_DKDansk elΕλληνικά ja日本語 it_ITItaliano pt_PTPortuguês pt_BRPortuguês do Brasil ro_RORomână ukУкраїнська thไทย fiSuomi