PVC-rør

PVC pipe is a plastic pipe with good corrosion resistance and mechanical strength. It has the advantages of light weight, high strength and low fluid resistance. It is often used in drainage, sewage, agricultural irrigation and other application scenarios.

Excellent Sealing Performance
Insulation and Heat Insulation Performance
Wide Application Range

Få et øjeblikkeligt tilbud

OEM tilpasset
Hurtig og sikker logistik

Beskrivelse
Anvendelse
Specifikation
Støtte
Relaterede produkter

PVC-rør

PVC pipe is a plastic pipe made of PVC as a raw material through extrusion or injection molding. It has excellent insulation, chemical corrosion resistance, pressure resistance, and mechanical strength, and is widely used in fluid pipe systems.

PVC pipe is very light and easy to carry and install. It is also resistant to acids, alkalis, salts, and most chemical media and is not easily corroded, so it is very suitable for transmitting such media. It has high mechanical strength, so it also has good pressure resistance and impact resistance, which can effectively ensure the safety of the pipe system transmission. PVC pipe also has excellent cost performance, and its raw material and processing costs are relatively low. Therefore, it is widely used in municipal drainage, agricultural irrigation, sewage, and other systems.

Funktioner

Lightweight and Easy to Carry

PVC pipe is lighter than metal pipe, requiring less effort to carry and transport, and is also very convenient to repair and replace.

Excellent Corrosion Resistance

PVC pipe has a certain resistance to substances such as acids, alkalis and salts, and will not be easily corroded, so it is suitable for pipe systems that transport such substances.

Small Fluid Resistance

The inner wall of the PVC pipe is very smooth, and the resistance and friction encountered by the fluid are small, which can effectively reduce energy consumption and ensure transmission efficiency.

Environmentally Friendly and Recyclable

PVC pipe is very environmentally friendly and can be 100% recycled and reused, which is very consistent with the concept of environmental protection and green development.

Anvendelser

Brændstof og olie

Camlock-koblinger er uundværlige i brændstof- og olieindustrien, hvor de giver pålidelige og lækagesikre forbindelser til overførsel af olieprodukter. Deres evne til hurtig tilslutning/frakobling øger sikkerheden og effektiviteten under på- og aflæsningsprocesser.

Landbrug

Mad og drikke

Gas

Specifikationer

1/2“-4”

Produktspecifikationer

Produktkode	LT-47A
Teknologi	Extrusion Molding/Injection Molding
Fysiske egenskaber	Tensile Strength: 40–60 MPa
Materiale, vi kan gøre	PVC
Tråd	BS21 (BSPT&BSPP), ANSI/ASME B1.20.1 (NPT), DIN2999(R/RP), JIS B O203/2(PT), KS BO221/2(PT) osv.
Temperature (Static State)	Conventional PVC: -15°C（5°F）to 60°C（140°F）
Overflade	Smooth Surface/UV Coating/Wear-Resistant Reinforcement Layer
Model	P-085
Form	Ligeværdig

Logistik og certificeringer

Certifikat	ISO 9001:2015, IS014001:2015, CE, ROHS, KC osv.
Pakke	PVC-pose til hvert stykke, kartoner med palle/udepalle/træbokse
Havn	Ningbo/Shanghai, Kina Eller anden havn efter anmodning.
Prøve	Tilbyd gratis prøver og afhentet fragt
Leveringsdetaljer	I henhold til mængderne og specifikationerne for hver ordreEt komplet lager for at give hurtige leverancer til små ordrer.Normale leveringstider er fra 30 til 45 dage efter modtagelse af depositummet
Generiske applikationer	Oil and Gas, Chemical, Food and Beverage, Agricultural Irrigation

Få et øjeblikkeligt tilbud

Støtte

Mere støtte

Installationsvejledning

The first installation method is glue bonding. Apply glue to the connecting port, quickly connect the two parts, and wait for the glue to solidify before completing the installation. The second is a threaded connection, usually a BSP or NPT thread. Rotate and tighten the two parts in the direction of the thread. Add sealant to strengthen the connection and improve the sealing effect. The third is a flange connection. This connection method requires the use of rubber washers and bolts to strengthen the seal. It is usually used in large-diameter pipe systems. Another connection method is quick-insert, which does not require additional tools to assist and can achieve a quick connection.

Vedligeholdelse efter salg

Ofte stillede spørgsmål

Looking for answers about the PVC Pipe? Visit our FAQ section for detailed information and expert insights.

Kontakt os

What working pressure can a PVC pipe withstand?

Usually, PVC pipe can maintain stable performance in systems with working pressures of 120-230 PSI.
Can PVC pipes be used in outdoor environments?

Yes. However, it is best to use PVC pipes with UV coating and try to avoid long-term direct sunlight to avoid affecting the service life of the pipe.
Can it be used to transport hot water?

Generally speaking, the upper limit of the working temperature range of our PVC pipe is 60℃, so try not to use it in pipe systems that transport hot water.
Can PVC pipe be used in drinking water systems?

Yes, our PVC pipe meets safety standards, is non-toxic and lead-free, and can be used in drinking water pipe systems.
What are the common connection methods?

Common connection methods include threaded connection, glue bonding, flange connection, etc. You can choose the corresponding connection method according to your system requirements.